Whitesnail garage services @ 50 First Centre

Engine enhancement package is to helps engine to get smoother pick up, lighter throttle, increase voltage to enjoy better air-con supply. All the mods are legal. And produce better complete combustion, as usually new car is tuned to be more "richer" or "more fuel ratio" when manufacturer design, this is to prevent too lean situation which will be not good for engine. Those who love silent engine will like this set up. It is quiet, no breatheless situation, keep your ride very punching with hot afternoon driving.

Example
Heat shield air box (to keep the air box as cool, even engine is hot)
*Sj-cai (refer to bottom)
Grounding 8 pts
performance knfilter to increase air flow.





*Sj-cai
*Rev more responsive :up: :up: :up:
*Removing lag when brake and re-acceraleration :up: :up: :up: :up: :up:
*quiet and smooth pick up. :up: :up: :up:
*Height intake at safe knee level. :up: :up: :up:
*only filter needs maintainance :up: :up:
*need only light taps on the pedal(thus save fuel) :up: :up: :up: :up:
*smooth gear change when going up slope :up: :up: :up:


Other type of services to enhance the ride:

-------------------------------------------------------------------------------------
S2) Open Pod (customized). Brands - knfilter /Apexi / Trust / Blitz / HKS
S3) Cold Air Induction (CAI)
S4) Grounding (customized). Brand - Whitesnail 8 pts grounding
S5) Heat shield for open pod/air box (customized) - to drop the temp by 5~10°C
S6) Engine oil additive (LUCAS OIL) - quieter engine, less wear and tear, restores compression, provides good seal between firing chamber and piston especially when drivers are using too think oil
S7) Transmission stop slip (LUCAS OIL) - smoother gear changes
S8) Fuel treatment (LUCAS OIL) - cleans and lubes your injectors and valves

S9) Voltage stabilizer (Japan shipment Pivot VS) (Blue /purple)
S10) Scan tool kits (most cars except JDM)
S11) Thermostat for radiator system.
-So that driver can do high rev
S12) Throttle body cleaning/ldling sensor(may need to change gasket)
-removing the throttle body from the intake manifold and clean)
S13) Changing of spark plugs (good and cheap NGK for hyundai) there is also iridium plugs + platimum to suit your ride..* call for enquiry
S14) Mould making for Fibreglass parts product. (air intake box/ piping/ battery tray/
S15) Air filter panel (OEM/ K&N)
S16) Horn (Magnum 2)
S17) Cleaning/oiling of knfilter only
S18) Troubleshooting of fault
S19) Battery (maintenace free)


Cars that I have done:
* Accent 1.3M, 1.5M
* Getz 1.1M, 1.3A, 1.4A, 1.6A/M
* Matrix 1.6A/M, REVO1.8A
* Trajet 2.0A CVVT
* Tucson 2.0A
* Tuscani 2.0A, 2.7A (V6)
* Santa Fe 2.4A , v6(new)
* Sonata 2.0A , 2.4A
* Atos
* Verna 1.4M, 1.6A/M
* Elantra 1.6M
* Avante
* Mazda 323, M2, M3, M6, RX-8 (rotary engine)
* Honda EXI, VTI-s, i-DSI City, jazz/fit, Airwave, civic type R, integra, crv, GEfit/jazz
* Kia Rio,Cerato, Picanto, (New F/L as well), Magentis , variant II
* Toyota Vios, Altis, Corolla G8/G9, Corona, Camry 2.0/2.4A, Rav4 1.8A, AE101, axio, BB, Rush, yaris,
* Nissan Sunny 1.6EX Saloon, 1.6SS-G Luxury, 1.6 SS Deluxe, Latio
* Suzuki Ignis 1.3A, Swift (new F/L), Ignis sport , SX4
* Subaru GC, TS , WRX, Sti
* Mitsubishi Lancer Mivec 1998, 2004 Lancer 1.6M , mivec colt , galant VR, 92 galant, evo 10, colt version R, EX , EX GT
* Perodua Kelisa GX
* Chevrolet Aveo 1.4A
* Ford Focus 1.6A
* Chery QQ

Other car makes are also welcome.


For more information and detail please refer :
1) http://www.lucasoil.com
2) http://www.knfilters.com :up:

for more information can SMS me at 97975869.

*Sorry that some time i am doing car and hands are dirty which i can't answer the phone.
As i am only 1 man show, hope all customer will understand and have a little bit more patient for me.
I do not have alot of chances to check my PM as i am always on the move
serving door step engine enhancement as well as holding a job as a fibreglass engineer
I would like to apologise to any interested party who have enquired my services that i didn't get back to, because i do not want to sound too pushy.
So i would appreciate an appointment can be confirmed on the spot by SMS , if possible. :up: So that i book you a time slot specially for your ride..


Please leave a SMS and will get back to you soon.

97975869 whitesnail

Its a WRX 08' hatchback with heat shield on blitz filter.

The piping is also shielded.

For those who are turbo charged car can also have their piping shielded to maximum. :up: :up: :up:

Wrx on ARC intake but fully heated when engine is at idling. and temperature is rising very fast.



After heat shielding the temperature increase very very slowly..

Apexi heat shield for Subaru TS

heat shield for perrin filter(filter driver provide)

ts again.

Another Subaru WRX heat shield model been done. :up: :up: :up:

It helps to reduce intake temperature and it has light weight.

Subaru 2.0 A HB



After heat shield.

Honda Euro R with HKS filter





powerfull engine but untidy set up and piping heavy with uniform 3" pipe.





After heat shield done + blitz 6" filter + customised FRP red intake pipe with smooth bend, so high flow is obtained.

civic type R FN2
Before heat shield






After heat shield

hi everyone.

To clear some doubts.

All the heat shields were onsite design project. No template been used. All designs are from my experience of different type of filter set up. I had about hundreds of set up to suit your need. Its all onsite and price maybe be a couple of dollar different depending on how complex the set up and positioning.

Pls free free to msg or call me at 97975869. SMS be better . As i am always on the move and might not be able to answer your valuable calls while doing another impreza or etc.

2008 vios hks open pod heat shield





The temp will remain lower with in the filter.

Hi to all

If the above picture seems similar to your engine.

Yes, its Eel intake from whitesnail services. No engine check light or cell light.

The colour can be white, black, blue, red, yellow...........
feel free to SMS to 97975869.

The eel intake scoop is inside the grille


The white colour is the eel scoop location.



This is the setup for FD2A/M

Eel intake for lancer CS3



The Red pipe is made of Fibreglass composite. Its light and store more air than stock rubber pipe.



This set up has cai at fog light too.



With heat shield air box.



There is 2x CAI (stock pipe + cai @ bumper) + filter opening for direct air




Air box can be open up to access to filter



A close up for the filter and Eel intake pipe.

For enquiry pls SMS /Call 97975869.

The Red FRP pipe can be colour of your choice.

Blitz drop in filter for rush/terios.



Heat shield + cai for rush/terios

For appointment pls sms to 97975869

Kelisa with airbox heat shield+ 5 pts grounding

Lancer EX 2.0 GT with grounding and pivot vs

Getz open pod with heat shield and cai

There are only 4 types of filter in the market.

http://www.mkiv.com/techarticles/filters_test/2/

* Form
* Paper
* Cotton
* Stainless steel

1) Form
eg HKS, ITG, WR, unifilter(from korea), simota

2) Paper
eg Apexi, Spoon, J's racing, blitz

3) Cotton
eg K&N, simota, zero-1000

4) stainless steel
eg simota, hurricane, i concept, blitz

There only these 4 kinds of filteration material in the world. Pls make a wise decision for your ride.

This page is usefull for those who are learning wat filter to choose.

Lancer Ex with customised heat shield airbox + customised Apexi. For better torque and pick up.

Eg8 with heat shield.

Whitesnail heat shield for BMC carbon fibre intake.

FD with whitesnail heat shield air box, Apexi drop in filter , 6 pt grounding and Eel intake system

FN2R with powered by whitesnail heat shield.